- From “W” to “WIDER”, a new model has appeared again .
- Ergonomic design with an emphasis on functionality .
- Easy maintenance is possible by changing the model .
- Apattern adjustment device that responds linearly .
- Air valve seat set with little individual difference .
- WIDER1[Small spray gun]
- WIDER2[Large spray gun]
- WIDER1L【小形スプレーガン】
- WIDER2L【大形スプレーガン】
- WIDER4
Reliable quality and stability.
From “W” to “WIDER”, a new model has appeared again .
The most important thing in industrial painted products is “quality and stability”.
Diversifying applications, evolving paints, we have adapted to this change and created the best spray guns. We went back to the starting point and developed “WIDER1 and WIDER2” models that pursued “further quality and stability”.
14 years after the debut of W-101 and 22 years after the debut of W-200, our spray gun has expanded all over the world. The experience and know-how cultivated there was poured into this new model “WIDER” and completed.
Ergonomic design with an emphasis on functionality .
With ergonomic design applied to various parts, the weight has been reduced by 5g. Since the various knobs are tapered and the grooves are deepened, the high grip makes it easy to make fine adjustments. In addition, by incorporating resin parts behind the needle valve spring, smooth paint adjustment is possible. Furthermore, by smoothing the tip shape of the trigger, operability has been improved when applying a small amount.
Easy maintenance is possible by changing the model .
The new WIDER is designed for easy maintenance. By changing the screw pitch of the cap from 1.0 mm to 1.5 mm, it can be tightened in about one and a half turns, which is half of the conventional one, and the rear end of the needle valve is shaped so that it can be easily attached and detached. did. And by providing a straight part without screws on the air and paint nipples, we realized easy installation of the joint.
A
pattern adjustment device that responds linearly .
The conventional pattern adjustment device reaches about 45% of the total pattern width in one rotation, about 80% in 1.5 rotations, and about 100% in two rotations, which is almost fully open. With the newly developed pattern adjustment device, it is adjusted to respond linearly to about 35% in one rotation, about 50% in 1.5 rotations, and about 70% in two rotations, making it easier to operate more intuitively.
Air valve seat set with little individual difference .
In the conventional air valve seat set, the size of the opening of the air path is a combination of large and small, so the amount of air differs depending on the positional relationship (= individual difference) at the time of screwing, and the amount of paint ejected and It could affect the pattern width. In the new WIDER, the structure has been reviewed and the openings have been made large and uniform to realize an air valve seat with little individual difference due to screwing. More stable painting is possible.
SPEC
| Traditional format | format | Paint supply method |
Nozzle diameter Φ mm |
Blowing air pressure MPa |
Air usage L / min |
Paint ejection amount ml / min |
Pattern opening mm |
Agglomerated state |
Air cap type |
Mass g |
Use |
|---|---|---|---|---|---|---|---|---|---|---|---|
| W-101-082P | WIDER1-08E2P | Pumping | 0.8 | 0.29 | 270 | 150 | 190 | High fine grain | E2P | 290 | Automobiles, woodworking / furniture, metal, plastic |
| W-101-102P | WIDER1-10E2P | Pumping | 1.0 | 200 | 220 | ||||||
| W-101-132P | WIDER1-13E2P | Pumping | 1.3 1.3 | 0.24 | 220 | 200 | 210 | Woodworking / furniture, metal, medium viscosity paint | |||
| W-101-152P | WIDER1-15E2P | Pumping | 1.5 | 250 | 240 | ||||||
| W-101-101S | WIDER1-10E1S | Sucking | 1.0 | 75 | 85 | 120 | General-purpose fine particles | E1 | Light industry, hobby | ||
| W-101-101G | WIDER1-10E1G | gravity | 1.0 | 95 | 130 | ||||||
| W-101-131S | WIDER1-13K1S | Sucking | 1.3 1.3 | 145 | 150 | 155 | General-purpose fine particles | K1 | Car repair, woodworking / furniture, metal, plastic |
||
| W-101-131G | WIDER1-13K1G | gravity | 1.3 1.3 | 160 | 170 | ||||||
| W-101-132S | WIDER1-13H2S | Sucking | 1.3 1.3 | 225 | 150 | 160 | High fine grain | H2 | |||
| W-101-132G | WIDER1-13H2G | gravity | 1.3 1.3 | 160 | 175 | ||||||
| W-101-134S | WIDER1-13H4S | Sucking | 1.3 1.3 | 0.2 | 210 | 140 * | 180 * | High fine grain | H4 | ||
| W-101-134G | WIDER1-13H4G | gravity | 1.3 1.3 | 155 * | 205 * | ||||||
| W-101-151S | WIDER1-15K1S | Sucking | 1.5 | 0.24 | 145 | 175 | 170 | General-purpose fine particles | K1 | Woodworking / furniture, metal | |
| W-101-151G | WIDER1-15K1G | gravity | 1.5 | 200 | 180 | ||||||
| W-101-152S | WIDER1-15H2S | Sucking | 1.5 | 225 | 170 | 175 | High fine grain | H2 | Car repair, woodworking / furniture, metal | ||
| W-101-152G | WIDER1-15H2G | gravity | 1.5 | 190 | 190 | ||||||
| W-101-181S | WIDER1-18N1S | Sucking | 1.8 1.8 | 170 | 210 | 170 | General-purpose fine particles | N1 | Woodworking / furniture, metal | ||
| W-101-181G | WIDER1-18N1G | gravity | 1.8 1.8 | 240 | 190 |
● All models have a spray distance of 200 mm. ● Paint viscosity 20 seconds / NK-2, * mark is 12 seconds / NK-2. ● All models, paint nipple G1 / 4, air nipple G1 / 4.
SPEC
| Traditional format | format | Paint supply method |
Nozzle diameter Φ mm |
Blowing air pressure MPa |
Air usage L / min |
Paint ejection amount ml / min |
Pattern opening mm |
Agglomerated state |
Air cap type |
Mass g |
Use |
|---|---|---|---|---|---|---|---|---|---|---|---|
| W-200-122P | WIDER2-12G2P | Pumping | 1.2 | 0.29 | 500 | 500 | 400 | High fine grain | G2P | 375 | Large parts / vehicles, line painting |
| W-200-151S | WIDER2-15K1S | Sucking | 1.5 | 200 | 240 | 210 | General-purpose fine particles | K1 | Woodworking / furniture, metal | ||
| W-200-151G | WIDER2-15K1G | gravity | 1.5 | 270 | 220 | ||||||
| W-200-152S | WIDER2-15K2S | Sucking | 1.5 | 330 | 240 | 290 | High fine grain | K2 | Car repair, woodworking / furniture, plastic |
||
| W-200-152G | WIDER2-15K2G | gravity | 1.5 | 270 | 320 | ||||||
| W-200-182S | WIDER2-18K2S | Sucking | 1.8 1.8 | 330 | 290 | 340 | High fine grain | K2 | |||
| W-200-182G | WIDER2-18K2G | gravity | 1.8 1.8 | 320 | 380 | ||||||
| W-200-201S | WIDER2-20R1S | Sucking | 2.0 | 260 | 350 | 260 | General-purpose fine particles | R1 | Metal, woodwork / furniture, medium viscosity paint | ||
| W-200-201G | WIDER2-20R1G | gravity | 2.0 | 410 | 280 | ||||||
| W-200-202S | WIDER2-20R2S | Sucking | 2.0 | 360 | 350 | 290 | High fine grain | R2 | |||
| W-200-202G | WIDER2-20R2G | gravity | 2.0 | 410 | 320 | ||||||
| W-200-251S | WIDER2-25W1S | 吸上 | 2.5 | 360 | 440 | 280 | 汎用微粒 | W1 | 金属、木工/家具、鉄骨錆止め、 高粘度塗料 |
||
| W-200-251G | WIDER2-25W1G | 重力 | 2.5 | 510 | 310 |
●全機種、吹付距離は250㎜。 ●塗料粘度20秒/NK- 2。 ●全機種、塗料ニップルG3/8、空気ニップルG1/4。
低圧領域での
高塗着効率・最適霧化を実現。
塗料使用量とVOC(揮発性有機化合物)を削減させる事は塗装作業において大きな課題です。独自の専用空気キャップ、専用ノズル、スプレーガン本体機構により、低圧領域での高塗着効率と最適霧化を実現しています。
※塗料使用量は20～30％節約できます（当社比）。
塗料の飛散を少なくすることにより、スプレーブースのメンテナンス期間を延ばすとともに、塗装作業者への汚れを最小限に抑えることができるため、作業環境の改善に寄与します。
SPEC
| 従来形式 | 形式 | 塗料 供給方式 |
ノズル口径 Φ㎜ |
吹付空気 圧力 MPa |
キャップ内 圧力 MPa |
空気 使用量 L/min |
塗料 噴出量 ml/min |
パタン 開き ㎜ |
微粒化 状態 |
空気 キャップ 形式 |
質量 g |
備考 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| LPH-101-122P | WIDER1L-12G2P | 圧送式 | 1.2 | 0.34 | 0.069 | 530 | 350 | 270 | 高微粒 | WIDER1L-G2 | 290 | 金属、木工、樹脂塗装 |
| LPH-101-124LVS | WIDER1L-2-12J2S | 吸上式 | 1.2 | 0.1 | 0.049 | 200 | 60 | 170 | WIDER1L-2-J2 | 木工・家具塗装、金属塗装 | ||
| LPH-101-144LVS | WIDER1L-2-14J2S | 1.4 | 80 | 180 | ||||||||
| LPH-101-164LVS | WIDER1L-2-16J2S | 1.6 | 95 | 190 | ||||||||
| LPH-101-124LVG | WIDER1L-2-12J2G | 重力式 | 1.2 | 80 ※1 | 200 ※1 | 自動車補修、金属、木工、樹脂塗装 | ||||||
| LPH-101-144LVG | WIDER1L-2-14J2G | 1.4 | 130 ※1 | 220 ※1 | ||||||||
| LPH-101-164LVG | WIDER1L-2-16J2G | 1.6 | 0.13 | 0.069 | 240 | 100 | 220 |
●全機種、吹付距離は200mm ●塗料粘度20秒/NK-2 ●全機種、塗料ニップルG1/4、空気ニップルG1/4 ※1 塗料粘度12秒/NK-2
SPEC
| 従来形式 | 形式 | 塗料 供給方式 |
ノズル口径 Φ㎜ |
吹付空気 圧力 MPa |
キャップ内 圧力 MPa |
空気 使用量 L/min |
塗料 噴出量 ml/min |
パタン 開き ㎜ |
微粒化 状態 |
空気 キャップ 形式 |
質量 g |
備考 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| New Model | WIDER2L-10G2P | 圧送式 | 1.0 | 0.2 | 0.069 | 470 | 300 | 250 | 高微粒 | WIDER2L-G2 | 375 | 大物部品・車両などの ライン塗装 |
| LPH-200-122P | WIDER2L-12G2P | 1.2 | 500 | 300 | ||||||||
| New Model | WIDER2L-14G2P | 1.4 | 500 | 300 | ||||||||
| WIDER2L-2-10G2P | 1.0 | 430 | 130 | 280 | WIDER2L-2-G2 | |||||||
| WIDER2L-2-12G2P | 1.2 | 150 | 300 |
●全機種、吹付距離は200mm ●塗料粘度20秒/NK-2 ●全機種、塗料ニップルG3/8、空気ニップルG1/4
2021年4月発売。
W-400/LPH-400の誕生から23年。待望のフルモデルチェンジを行いました。新たに“WI DER4”と低圧の“WI DER4L”に生まれ変わり、機能性とデザインを一新し、これまで以上に使いやすく、そして洗練されたデザインになりました。
SPEC
| 従来形式 | 形式 | 塗料 供給方式 |
ノズル口径 Φ㎜ |
形状 | 吹付空気 圧力 MPa |
空気キャップ内 圧力 MPa |
塗料 噴出量 ml/min |
空気 使用量 L/min |
パタン 開き ㎜ |
吹付距離 mm |
空気 キャップ 形式 |
質量 g |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| W-400-122G | WIDER4-12J2 | 重力 | 1.2 | ストレート | 0.20 | – | 140 | 280 | 230 | 250 | WIDER4-J2 | 355 |
| W-400-132G | WIDER4-13J2 | 1.3 | 160 | 260 | ||||||||
| W-400-142G | WIDER4-14J2 | 1.4 | 210 | 280 | ||||||||
| W-400-162G | WIDER4-16J2 | 1.6 | 240 | 300 | ||||||||
| W-400-182G | WIDER4-18N2 | 1.8 | 320 | 290 | 280 | WIDER4-N2 | ||||||
| W-400-251G | WIDER4-25W1 | 2.5 | 0.29 | 555 | 360 | 380 | WIDER2-W1 | |||||
| 【低圧】LPH-400-134LV | WIDER4L-V13J2 | 重力 | 1.3 | Vスリット | 0.11 | 0.07 | 110 | 270 | 280 | 200 | WIDER4L-J2 | 355 |
| 【低圧】LPH-400-144LV | WIDER4L-V14J2 | 1.4 | 130 | 290 | ||||||||
| 【低圧】LPH-400-164LV | WIDER4L-V16J2 | 1.6 | 150 | 300 |
- Súng phun sơn Anest Iwata dòng Kiwami
- Hướng dẫn lắp đặt sử dụng vệ sinh sửa chữa…
- Súng phun sơn ô tô W-101-134G chính hãng mua ở…
- Súng phun sơn giày da dùng loại súng nào?
- Súng phun sơn tự động series WA-101 và WA-200 Anest…
- Súng phun sơn Anest Iwata chính hãng W300-132G
- Catalogue Súng phun sơn Anest Iwata
- Súng phun sơn tự động WA-101-082P.AC và súng WA-101-082P Anest…
